黄东旭解析 TiDB 的核心优势
677
2023-03-31
DDL一直是DBA业务中的大项,看了TIDB的P社黄潇大佬的DDL讲解,恰巧我们的mysql业务大表也遇到了DDL的变更项,变更内容是将varchar(10)变更成varchar(20),这个变更通过官方文档很容易知道是不需要rebuild的(这里要注意下这个varchar(255)的临界值与字符集有关,如果是utf8则为255/3,如果是utf8mb4则为255/4),但是问题是这个字段是索引字段,所以这里我就不太确定了,那么怎么办呢,解决办法就是看源码和测试了。
我们可以从官网的文章1,文章2中明白性能监控是如何打开的
mysql> UPDATE performance_schema.setup_instruments SET ENABLED = YES WHERE NAME LIKE stage/innodb/alter%; Query OK, 7 rows affected (0.00 sec) Rows matched: 7 Changed: 7 Warnings: 0 mysql> UPDATE performance_schema.setup_consumers SET ENABLED = YES WHERE NAME LIKE %stages%; Query OK, 3 rows affected (0.00 sec) Rows matched: 3 Changed: 3 Warnings: 0源码地址
enum_alter_inplace_result check_if_supported_inplace_alter( TABLE* altered_table, Alter_inplace_info* ha_alter_info); /** Allows InnoDB to update internal structures with concurrent writes blocked (provided that check_if_supported_inplace_alter() did not return HA_ALTER_INPLACE_NO_LOCK). This will be invoked before inplace_alter_table(). @param altered_table TABLE object for new version of table. @param ha_alter_info Structure describing changes to be done by ALTER TABLE and holding data used during in-place alter. @retval true Failure @retval false Success */ bool prepare_inplace_alter_table( TABLE* altered_table, Alter_inplace_info* ha_alter_info); /** Alter the table structure in-place with operations specified using HA_ALTER_FLAGS and Alter_inplace_information. The level of concurrency allowed during this operation depends on the return value from check_if_supported_inplace_alter(). @param altered_table TABLE object for new version of table. @param ha_alter_info Structure describing changes to be done by ALTER TABLE and holding data used during in-place alter. @retval true Failure @retval false Success */ bool inplace_alter_table( TABLE* altered_table, Alter_inplace_info* ha_alter_info); /** Commit or rollback the changes made during prepare_inplace_alter_table() and inplace_alter_table() inside the storage engine. Note that the allowed level of concurrency during this operation will be the same as for inplace_alter_table() and thus might be higher than during prepare_inplace_alter_table(). (E.g concurrent writes were blocked during prepare, but might not be during commit). @param altered_table TABLE object for new version of table. @param ha_alter_info Structure describing changes to be done by ALTER TABLE and holding data used during in-place alter. @param commit true => Commit, false => Rollback. @retval true Failure @retval false Success */ bool commit_inplace_alter_table( TABLE* altered_table, Alter_inplace_info* ha_alter_info, bool commit); /** @} */ bool check_if_incompatible_data( HA_CREATE_INFO* info, uint table_changes);源码地址
/** Operations for creating secondary indexes (no rebuild needed) */ static const Alter_inplace_info::HA_ALTER_FLAGS INNOBASE_ONLINE_CREATE = Alter_inplace_info::ADD_INDEX | Alter_inplace_info::ADD_UNIQUE_INDEX | Alter_inplace_info::ADD_SPATIAL_INDEX; /** Operations for rebuilding a table in place */ static const Alter_inplace_info::HA_ALTER_FLAGS INNOBASE_ALTER_REBUILD = Alter_inplace_info::ADD_PK_INDEX | Alter_inplace_info::DROP_PK_INDEX | Alter_inplace_info::CHANGE_CREATE_OPTION /* CHANGE_CREATE_OPTION needs to check innobase_need_rebuild() */ | Alter_inplace_info::ALTER_COLUMN_NULLABLE | Alter_inplace_info::ALTER_COLUMN_NOT_NULLABLE | Alter_inplace_info::ALTER_STORED_COLUMN_ORDER | Alter_inplace_info::DROP_STORED_COLUMN | Alter_inplace_info::ADD_STORED_BASE_COLUMN | Alter_inplace_info::RECREATE_TABLE /* | Alter_inplace_info::ALTER_STORED_COLUMN_TYPE */ ; /** Operations that require changes to data */ static const Alter_inplace_info::HA_ALTER_FLAGS INNOBASE_ALTER_DATA = INNOBASE_ONLINE_CREATE | INNOBASE_ALTER_REBUILD; /** Operations for altering a table that InnoDB does not care about */ static const Alter_inplace_info::HA_ALTER_FLAGS INNOBASE_INPLACE_IGNORE = Alter_inplace_info::ALTER_COLUMN_DEFAULT | Alter_inplace_info::ALTER_COLUMN_COLUMN_FORMAT | Alter_inplace_info::ALTER_COLUMN_STORAGE_TYPE | Alter_inplace_info::ALTER_VIRTUAL_GCOL_EXPR | Alter_inplace_info::ALTER_RENAME; /** Operations on foreign key definitions (changing the schema only) */ static const Alter_inplace_info::HA_ALTER_FLAGS INNOBASE_FOREIGN_OPERATIONS = Alter_inplace_info::DROP_FOREIGN_KEY | Alter_inplace_info::ADD_FOREIGN_KEY; /** 整理重点看下,改变字段长度其实就是改变了索引的长度 */ /** Operations that InnoDB cares about and can perform without rebuild */ static const Alter_inplace_info::HA_ALTER_FLAGS INNOBASE_ALTER_NOREBUILD = INNOBASE_ONLINE_CREATE | INNOBASE_FOREIGN_OPERATIONS | Alter_inplace_info::DROP_INDEX | Alter_inplace_info::DROP_UNIQUE_INDEX | Alter_inplace_info::RENAME_INDEX | Alter_inplace_info::ALTER_COLUMN_NAME //这里的PACK_LENGTH要注意,也可以理解成字段长度的变化,实际是指字段存储的大小的变化,比如字段是varchar,utf8mb4来看,那么varchar(10)和varchar(63)的PACK_LENGTH都是相等的 | Alter_inplace_info::ALTER_COLUMN_EQUAL_PACK_LENGTH | Alter_inplace_info::ALTER_INDEX_COMMENT | Alter_inplace_info::ADD_VIRTUAL_COLUMN | Alter_inplace_info::DROP_VIRTUAL_COLUMN | Alter_inplace_info::ALTER_VIRTUAL_COLUMN_ORDER //Alter_inplace_info::ALTER_COLUMN_INDEX_LENGTH;这个定义是5.7.23才开始有的 | Alter_inplace_info::ALTER_COLUMN_INDEX_LENGTH; /* | Alter_inplace_info::ALTER_VIRTUAL_COLUMN_TYPE; */源码地址
/** Change column datatype in such way that new type has compatible packed representation with old type, so it is theoretically possible to perform change by only updating data dictionary without changing table rows. */ static const HA_ALTER_FLAGS ALTER_COLUMN_EQUAL_PACK_LENGTH = 1ULL << 14; /** Change in index length such that it does not require index rebuild. For example, change in index length due to column expansion like varchar(X) changed to varchar(X + N). */ static const HA_ALTER_FLAGS ALTER_COLUMN_INDEX_LENGTH = 1ULL << 42;源码地址
/** Data describing the table being created by CREATE TABLE or altered by ALTER TABLE. */ class Alter_info { public: /* These flags are set by the parser and describes the type of operation(s) specified by the ALTER TABLE statement. They do *not* describe the type operation(s) to be executed by the storage engine. For example, we dont yet know the type of index to be added/dropped. */ // Set for CHANGE [COLUMN] | MODIFY [CHANGE] // Set by mysql_recreate_table() static const uint ALTER_CHANGE_COLUMN = 1L << 2; // Set for ALTER [COLUMN] ... SET DEFAULT ... | DROP DEFAULT static const uint ALTER_CHANGE_COLUMN_DEFAULT = 1L << 8; enum enum_enable_or_disable { LEAVE_AS_IS, ENABLE, DISABLE }; /** The different values of the ALGORITHM clause. Describes which algorithm to use when altering the table. */ enum enum_alter_table_algorithm { // In-place if supported, copy otherwise. ALTER_TABLE_ALGORITHM_DEFAULT, // In-place if supported, error otherwise. ALTER_TABLE_ALGORITHM_INPLACE, // Copy if supported, error otherwise. ALTER_TABLE_ALGORITHM_COPY }; /** The different values of the LOCK clause. Describes the level of concurrency during ALTER TABLE. */ enum enum_alter_table_lock { // Maximum supported level of concurency for the given operation. ALTER_TABLE_LOCK_DEFAULT, // Allow concurrent reads & writes. If not supported, give erorr. ALTER_TABLE_LOCK_NONE, // Allow concurrent reads only. If not supported, give error. ALTER_TABLE_LOCK_SHARED, // Block reads and writes. ALTER_TABLE_LOCK_EXCLUSIVE }; /** Status of validation clause in ALTER TABLE statement. Used during partitions and GC alterations. */ enum enum_with_validation { /** Default value, used when its not specified in the statement. Means WITH VALIDATION for partitions alterations and WITHOUT VALIDATION for altering virtual GC. */ ALTER_VALIDATION_DEFAULT, ALTER_WITH_VALIDATION, ALTER_WITHOUT_VALIDATION };源码地址
for (key_part= table_key->key_part, new_part= new_key->key_part; key_part < end; key_part++, new_part++) { new_field= get_field_by_index(alter_info, new_part->fieldnr); /* If there is a change in index length due to column expansion like varchar(X) changed to varchar(X + N) and has a compatible packed data representation, we mark it for fast/INPLACE change in index definition. Some engines like InnoDB supports INPLACE alter for such cases. In other cases, key definition has changed if we are using a different field or if the used key part length is different, or key part direction has changed. */ if (key_part->length != new_part->length && ha_alter_info->alter_info->flags == Alter_info::ALTER_CHANGE_COLUMN && (key_part->field->is_equal((Create_field *)new_field) == IS_EQUAL_PACK_LENGTH)) { ha_alter_info->handler_flags|= Alter_inplace_info::ALTER_COLUMN_INDEX_LENGTH; } else if (key_part->length != new_part->length) return true;我们通过上面的2,3,5可以发现,ALTER_COLUMN_INDEX_LENGTH在PACK_LENGTH(这个pack_length在varchar的保存实际内容的长度,而我们是utf8mb4,所以临界值是255/4=64,所以变更前后的pack_length相同)不变的情况下是norebuild的,但是我们上面的实验也确实出现了rebuild,那么这是为什么呢,我在注释中也写了,ALTER_COLUMN_INDEX_LENGTH是在5.7.23中才开始加的,而我们的实验环境是5.7.22,所以才会进行rebuild
static const Alter_inplace_info::HA_ALTER_FLAGS INNOBASE_ALTER_NOREBUILD = INNOBASE_ONLINE_CREATE | Alter_inplace_info::ALTER_VIRTUAL_COLUMN_ORDER //Alter_inplace_info::ALTER_COLUMN_INDEX_LENGTH;这个定义是5.7.23才开始有的 | Alter_inplace_info::ALTER_COLUMN_INDEX_LENGTH;
我们采用5.7.30进行实验,发现performance_schema.events_stages_history的内容为空,所以我们的判断是正确的
初次探索源码,有很多地方可能理解的不对,之后会学习些DDL相关的如加MDL锁,rebuild等等的具体操作,会与tidb的DDL相关交互学习,欢迎各位大佬指出不足之处
ps: 文章首发在csdn了
版权声明:本文内容由网络用户投稿,版权归原作者所有,本站不拥有其著作权,亦不承担相应法律责任。如果您发现本站中有涉嫌抄袭或描述失实的内容,请联系我们jiasou666@gmail.com 处理,核实后本网站将在24小时内删除侵权内容。