在openEuler 2203、2003上单机部署TiDB 6.1.1的操作指南

背景

TiDB 6.1.1 版本发布之后，已经支持在正式环境下将tidb部署到麒麟V10系统。 一直想在openEuler系统行运行TiDB，就进行了新版本的安装测试。给大家提供参考。

安装环境

操作系统：openEuler2203或openEuler2003 SP3

TiDB数据库版本：TiDB v6.1.1

系统配置

挂载数据盘

查看数据盘。/dev/sdb

fdisk -l

创建分区。

parted -s -a optimal /dev/sdb mklabel gpt -- mkpart primary ext4 1 -1

格式化文件系统。

mkfs.ext4 /dev/sdb1

查看数据盘分区 UUID。

# lsblk -f NAME           FSTYPE     LABEL UUID                                   MOUNTPOINT sda                                                                       ├─sda1         xfs               278ae69e-30a6-40ca-a764-cd8862ef1527   /boot └─sda2         LVM2_member       tIRIrI-soRh-5TBf-q6tn-cMTd-DMdZ-FucCk7 ├─centos-root xfs               13d08fa9-88bc-4b0a-bcab-4e1c1072afd2   / └─centos-swap swap             488f568c-b72f-414e-9394-0765cbb9e5a2   [SWAP] sdb                                                                       └─sdb1         ext4             87d0467c-d3a1-4916-8112-aed259bf8c8c

本例中 sdb1 的 UUID 为 87d0467c-d3a1-4916-8112-aed259bf8c8c。

编辑 /etc/fstab 文件，添加 nodelalloc 挂载参数。

by reference, are maintained under /dev/disk # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info # /dev/mapper/centos-root /                       xfs     defaults        0 0 UUID=278ae69e-30a6-40ca-a764-cd8862ef1527 /boot                   xfs     defaults        0 0 /dev/mapper/centos-swap swap                   swap   defaults        0 0 UUID=87d0467c-d3a1-4916-8112-aed259bf8c8c /u02 ext4 defaults,nodelalloc,noatime 0 2

挂载数据盘。

mkdir /u02 && mount -a

执行以下命令，如果文件系统为 ext4，并且挂载参数中包含 nodelalloc，则表示已生效。

# mount -t ext4 /dev/sdb1 on /u02 type ext4 (rw,noatime,nodelalloc,data=ordered)关闭防火墙

检查防火墙状态（以 CentOS Linux release 7.7.1908 (Core) 为例）

sudo firewall-cmd --state sudo systemctl status firewalld.service

关闭防火墙服务

sudo systemctl stop firewalld.service

关闭防火墙自动启动服务

sudo systemctl disable firewalld.service

检查防火墙状态

sudo systemctl status firewalld.service

开启时钟同步

检查chronyd服务状态

[root@cen7-pg-01 ~]# systemctl status chronyd.service ● chronyd.service - NTP client/server Loaded: loaded (/usr/lib/systemd/system/chronyd.service; disabled; vendor preset: enabled) Active: inactive (dead) Docs: man:chronyd(8) man:chrony.conf(5) [root@cen7-pg-01 ~]# chronyc tracking 506 Cannot talk to daemon

设置chronyd同步服务器，开启所有节点时钟同步功能

# 修改同步服务器配置文件： # vi /etc/chrony.conf # Please consider joining the pool (http://www.pool.ntp.org/join.html). #server 0.centos.pool.ntp.org iburst #server 1.centos.pool.ntp.org iburst #server 2.centos.pool.ntp.org iburst #server 3.centos.pool.ntp.org iburst server 192.168.56.10 iburst # Allow NTP client access from local network. allow 192.168.0.0/16 # Serve time even if not synchronized to a time source. local stratum 10 # 修改其他节点chronyd服务配置文件： # vi /etc/chrony.conf # Use public servers from the pool.ntp.org project. # Please consider joining the pool (http://www.pool.ntp.org/join.html). #server 0.centos.pool.ntp.org iburst #server 1.centos.pool.ntp.org iburst #server 2.centos.pool.ntp.org iburst #server 3.centos.pool.ntp.org iburst server 192.168.56.10 iburst # 启动chronyd服务: # systemctl start chronyd.service # systemctl status chronyd.service ● chronyd.service - NTP client/server Loaded: loaded (/usr/lib/systemd/system/chronyd.service; disabled; vendor preset: enabled) Active: active (running) since Fri 2022-07-22 14:39:39 CST; 4s ago Docs: man:chronyd(8) man:chrony.conf(5) Process: 5505 ExecStartPost=/usr/libexec/chrony-helper update-daemon (code=exited, status=0/SUCCESS) Process: 5501 ExecStart=/usr/sbin/chronyd $OPTIONS (code=exited, status=0/SUCCESS) Main PID: 5504 (chronyd) Tasks: 1 CGroup: /system.slice/chronyd.service └─5504 /usr/sbin/chronyd Jul 22 14:39:39 cen7-mysql-01 systemd[1]: Stopped NTP client/server. Jul 22 14:39:39 cen7-mysql-01 systemd[1]: Starting NTP client/server... Jul 22 14:39:39 cen7-mysql-01 chronyd[5504]: chronyd version 3.4 starting (+CMDMON +NTP +REFCLOCK +RTC +PRIVDROP +SCFILTER +SIGND +ASYNCDNS +SECHASH +IPV6 +DEBUG) Jul 22 14:39:39 cen7-mysql-01 chronyd[5504]: Frequency 0.156 +/- 235.611 ppm read from /var/lib/chrony/drift Jul 22 14:39:39 cen7-mysql-01 systemd[1]: Started NTP client/server. Jul 22 14:39:44 cen7-mysql-01 chronyd[5504]: Selected source 192.168.56.10 [root@cen7-mysql-01 ~]# chronyc tracking Reference ID : C0A8380A (cen7-mysql-01) Stratum : 11 Ref time (UTC) : Fri Jul 22 06:39:43 2022 System time : 0.000000000 seconds fast of NTP time Last offset : -0.000003156 seconds RMS offset : 0.000003156 seconds Frequency : 0.107 ppm fast Residual freq : -0.019 ppm Skew : 250.864 ppm Root delay : 0.000026199 seconds Root dispersion : 0.001826834 seconds Update interval : 0.0 seconds Leap status : Normal # systemctl enable chronyd.service Created symlink from /etc/systemd/system/multi-user.target.wants/chronyd.service to /usr/lib/systemd/system/chronyd.service.

优化系统参数

在生产系统的 TiDB 中，建议按照官方文档对操作系统进行配置优化

TiDB 环境与系统配置检查 | PingCAP Docs

在虚机环境下只进行了关闭透明大页操作：

查看透明大页的开启状态。

# cat /sys/kernel/mm/transparent_hugepage/enabled [always] madvise never # cat /sys/kernel/mm/transparent_hugepage/defrag always defer defer+madvise [madvise] never 以上结果表明透明大页处于启用状态，需要关闭。

手动关闭操作：

-- 临时关闭透明大页： # echo never > /sys/kernel/mm/transparent_hugepage/enabled # echo never > /sys/kernel/mm/transparent_hugepage/defrag # cat /sys/kernel/mm/transparent_hugepage/enabled always madvise [never] # cat /sys/kernel/mm/transparent_hugepage/defrag always defer defer+madvise madvise [never] -- 下面是永久关闭透明大页操作方法： # vi /etc/rc.d/rc.local -- 在文件尾最佳下面内容 if test -f /sys/kernel/mm/transparent_hugepage/enabled; then echo never > /sys/kernel/mm/transparent_hugepage/enabled fi if test -f /sys/kernel/mm/transparent_hugepage/defrag; then echo never > /sys/kernel/mm/transparent_hugepage/defrag fi -- 赋予/etc/rc.d/rc.local可执行权限 # chmod +x /etc/rc.d/rc.local

修改操作系统参数

修改/etc/sysctl.conf，设置操作系统相关参数

# echo "fs.file-max = 1000000">> /etc/sysctl.conf # echo "net.core.somaxconn = 32768">> /etc/sysctl.conf # echo "net.ipv4.tcp_tw_recycle = 0">> /etc/sysctl.conf # echo "net.ipv4.tcp_syncookies = 0">> /etc/sysctl.conf # echo "vm.overcommit_memory = 1">> /etc/sysctl.conf -- 使修改生效 # sysctl -p

openEuler2203系统修改修改sshd服务配置文件，支持ssh-rsa

-- 修改sshd服务配置文件 # echo “PubkeyAcceptedKeyTypes=+ssh-rsa” >>/etc/ssh/sshd_config -- 重启sshd服务 # systemctl restart sshd

创建TiDB用户并赋权

# groupadd tidb # useradd -g tidb tidb # passwd tidb Changing password for user tidb. New password: tidb BAD PASSWORD: The password is shorter than 8 characters Retype new password: tidb passwd: all authentication tokens updated successfully. -- 赋予tidb用户在/u02创建目录的权限,用于创建tidb的安装目录和数据目录 # chown -R tidb: /u02 -- 赋予 tidb用户sudo权限 # visudo -- 添加一行：tidb ALL=(ALL) NOPASSWD: ALL ## Same thing without a password # %wheel ALL=(ALL) NOPASSWD: ALL tidb ALL=(ALL) NOPASSWD: ALL --修改/etc/security/limits.conf文件， 配置tidb用户的操作资源系统限制 cat << EOF >>/etc/security/limits.conf tidb soft nofile 1000000 tidb hard nofile 1000000 tidb soft stack 32768 tidb hard stack 32768 EOF

安装TiDB

部署离线环境 TiUP 组件

-- 解压安装包 # tar -zxf tidb-community-server-v6.1.1-linux-amd64.tar.gz # tar -zxf tidb-community-toolkit-v6.1.1-linux-amd64.tar.gz # chown -R tidb: /u02/soft/ti* -- 配置环境变量 # su - tidb $ cd /u02/soft/tidb-community-server-v6.1.1-linux-amd64/ $ sh ./local_install.sh && source ~/.bash_profile Disable telemetry success Successfully set mirror to /u02/soft/tidb-community-server-v6.1.1-linux-amd64 Detected shell: bash Shell profile: /home/tidb/.bash_profile /home/tidb/.bash_profile has been modified to to add tiup to PATH open a new terminal or source /home/tidb/.bash_profile to use it Installed path: /home/tidb/.tiup/bin/tiup =============================================== 1. source /home/tidb/.bash_profile 2. Have a try: tiup playground =============================================== $ which tiup /home/tidb/.tiup/bin/tiup

合并toolkit包

$ cd /u02/soft/tidb-community-server-v6.1.1-linux-amd64/ $ cp -rp keys ~/.tiup/ $ tiup mirror merge ../tidb-community-toolkit-v6.1.1-linux-amd64

创建安装拓扑文件 这里由于测试条件限制，pd,tidb server和tikv 都设置为了单节点...

$ vi topology.yaml global: user: "tidb" --数据库安装用户 ssh_port: 22 --ssh 端口号 deploy_dir: "/u02/tidb-deploy" -- TiDB安装目录 data_dir: "/u02/tidb-data" -- TiDB数据目录 #server_configs: {} pd_servers: -- pd节点配置 - host: 192.168.56.11 tidb_servers: -- tidb server节点配置 - host: 192.168.56.11 tikv_servers: -- tikv 节点配置 - host: 192.168.56.11 monitoring_servers: -- 监控节点配置 - host: 192.168.56.11 grafana_servers: -- 监控节点配置 - host: 192.168.56.11 alertmanager_servers: -- 监控节点配置 - host: 192.168.56.11

安装tidb集群

-- tidb安装环境检查 $ tiup cluster check /home/tidb/topology.yaml -p tiup is checking updates for component cluster ... Starting component `cluster`: /home/tidb/.tiup/components/cluster/v1.10.3/tiup-cluster check /home/tidb/topology.yaml -p Input SSH password: 输入安装用户密码 + Detect CPU Arch Name - Detecting node 192.168.56.11 Arch info ... Done + Detect CPU OS Name - Detecting node 192.168.56.11 OS info ... Done + Download necessary tools - Downloading check tools for linux/amd64 ... Done + Collect basic system information + Collect basic system information - Getting system info of 192.168.56.11:22 ... Done + Check time zone - Checking node 192.168.56.11 ... Done + Check system requirements + Check system requirements + Check system requirements + Check system requirements - Checking node 192.168.56.11 ... Done - Checking node 192.168.56.11 ... Done - Checking node 192.168.56.11 ... Done - Checking node 192.168.56.11 ... Done - Checking node 192.168.56.11 ... Done - Checking node 192.168.56.11 ... Done + Cleanup check files - Cleanup check files on 192.168.56.11:22 ... Done - Cleanup check files on 192.168.56.11:22 ... Done - Cleanup check files on 192.168.56.11:22 ... Done - Cleanup check files on 192.168.56.11:22 ... Done - Cleanup check files on 192.168.56.11:22 ... Done - Cleanup check files on 192.168.56.11:22 ... Done Node Check Result Message ---- ----- ------ ------- 192.168.56.11 cpu-cores Pass number of CPU cores / threads: 1 192.168.56.11 command Fail numactl not usable, bash: line 1: numactl: command not found 192.168.56.11 thp Pass THP is disabled 192.168.56.11 service Fail service irqbalance is not running 192.168.56.11 os-version Fail os vendor openEuler not supported 192.168.56.11 cpu-governor Warn Unable to determine current CPU frequency governor policy 192.168.56.11 swap Warn swap is enabled, please disable it for best performance 192.168.56.11 memory Pass memory size is 0MB 192.168.56.11 network Pass network speed of enp0s3 is 1000MB 192.168.56.11 selinux Pass SELinux is disabled -- TiDB集群安装环境问题修复 $ tiup cluster check /home/tidb/topology.yaml --apply -p tiup is checking updates for component cluster ... Starting component `cluster`: /home/tidb/.tiup/components/cluster/v1.10.3/tiup-cluster check /home/tidb/topology.yaml --apply -p Input SSH password: 输入安装用户密码 + Detect CPU Arch Name - Detecting node 192.168.56.11 Arch info ... Done + Detect CPU OS Name - Detecting node 192.168.56.11 OS info ... Done + Download necessary tools - Downloading check tools for linux/amd64 ... Done + Collect basic system information + Collect basic system information - Getting system info of 192.168.56.11:22 ... Done + Check time zone - Checking node 192.168.56.11 ... Done + Check system requirements + Check system requirements + Check system requirements + Check system requirements - Checking node 192.168.56.11 ... Done - Checking node 192.168.56.11 ... Done - Checking node 192.168.56.11 ... Done - Checking node 192.168.56.11 ... Done - Checking node 192.168.56.11 ... Done - Checking node 192.168.56.11 ... Done + Cleanup check files - Cleanup check files on 192.168.56.11:22 ... Done - Cleanup check files on 192.168.56.11:22 ... Done - Cleanup check files on 192.168.56.11:22 ... Done - Cleanup check files on 192.168.56.11:22 ... Done - Cleanup check files on 192.168.56.11:22 ... Done - Cleanup check files on 192.168.56.11:22 ... Done Node Check Result Message ---- ----- ------ ------- 192.168.56.11 cpu-governor Warn Unable to determine current CPU frequency governor policy, auto fixing not supported 192.168.56.11 memory Pass memory size is 0MB 192.168.56.11 selinux Pass SELinux is disabled 192.168.56.11 thp Pass THP is disabled 192.168.56.11 command Fail numactl not usable, bash: line 1: numactl: command not found, auto fixing not supported 192.168.56.11 os-version Fail os vendor openEuler not supported, auto fixing not supported 192.168.56.11 cpu-cores Pass number of CPU cores / threads: 1 192.168.56.11 swap Warn will try to disable swap, please also check /etc/fstab manually 192.168.56.11 network Pass network speed of enp0s3 is 1000MB 192.168.56.11 service Fail will try to start irqbalance.service + Try to apply changes to fix failed checks - Applying changes on 192.168.56.11 ... Done -- TiDB集群安装 $ ]$ tiup cluster deploy tidb-v611 v6.1.1 /home/tidb/topology.yaml -p tiup is checking updates for component cluster ... Starting component `cluster`: /home/tidb/.tiup/components/cluster/v1.10.3/tiup-cluster deploy tidb-v611 v6.1.1 /home/tidb/topology.yaml -p Input SSH password: + Detect CPU Arch Name - Detecting node 192.168.56.11 Arch info ... Done + Detect CPU OS Name - Detecting node 192.168.56.11 OS info ... Done Please confirm your topology: Cluster type: tidb Cluster name: tidb-v611 Cluster version: v6.1.1 Role Host Ports OS/Arch Directories ---- ---- ----- ------- ----------- pd 192.168.56.11 2379/2380 linux/x86_64 /u02/tidb-deploy/pd-2379,/u02/tidb-data/pd-2379 tikv 192.168.56.11 20160/20180 linux/x86_64 /u02/tidb-deploy/tikv-20160,/u02/tidb-data/tikv-20160 tidb 192.168.56.11 4000/10080 linux/x86_64 /u02/tidb-deploy/tidb-4000 prometheus 192.168.56.11 9090/12020 linux/x86_64 /u02/tidb-deploy/prometheus-9090,/u02/tidb-data/prometheus-9090 grafana 192.168.56.11 3000 linux/x86_64 /u02/tidb-deploy/grafana-3000 alertmanager 192.168.56.11 9093/9094 linux/x86_64 /u02/tidb-deploy/alertmanager-9093,/u02/tidb-data/alertmanager-9093 Attention: 1. If the topology is not what you expected, check your yaml file. 2. Please confirm thereone - Download tikv:v6.1.1 (linux/amd64) ... Done - Download tidb:v6.1.1 (linux/amd64) ... Done - Download prometheus:v6.1.1 (linux/amd64) ... Done - Download grafana:v6.1.1 (linux/amd64) ... Done - Download alertmanager: (linux/amd64) ... Done - Download node_exporter: (linux/amd64) ... Done - Download blackbox_exporter: (linux/amd64) ... Done + Initialize target host environments - Prepare 192.168.56.11:22 ... Done + Deploy TiDB instance - Copy pd -> 192.168.56.11 ... Done - Copy tikv -> 192.168.56.11 ... Done - Copy tidb -> 192.168.56.11 ... Done - Copy prometheus -> 192.168.56.11 ... Done - Copy grafana -> 192.168.56.11 ... Done - Copy alertmanager -> 192.168.56.11 ... Done - Deploy node_exporter -> 192.168.56.11 ... Done - Deploy blackbox_exporter -> 192.168.56.11 ... Done + Copy certificate to remote host + Init instance configs - Generate config pd -> 192.168.56.11:2379 ... Done - Generate config tikv -> 192.168.56.11:20160 ... Done - Generate config tidb -> 192.168.56.11:4000 ... Done - Generate config prometheus -> 192.168.56.11:9090 ... Done - Generate config grafana -> 192.168.56.11:3000 ... Done - Generate config alertmanager -> 192.168.56.11:9093 ... Done + Init monitor configs - Generate config node_exporter -> 192.168.56.11 ... Done - Generate config blackbox_exporter -> 192.168.56.11 ... Done Enabling component pd Enabling instance 192.168.56.11:2379 Enable instance 192.168.56.11:2379 success Enabling component tikv Enabling instance 192.168.56.11:20160 Enable instance 192.168.56.11:20160 success Enabling component tidb Enabling instance 192.168.56.11:4000 Enable instance 192.168.56.11:4000 success Enabling component prometheus Enabling instance 192.168.56.11:9090 Enable instance 192.168.56.11:9090 success Enabling component grafana Enabling instance 192.168.56.11:3000 Enable instance 192.168.56.11:3000 success Enabling component alertmanager Enabling instance 192.168.56.11:9093 Enable instance 192.168.56.11:9093 success Enabling component node_exporter Enabling instance 192.168.56.11 Enable 192.168.56.11 success Enabling component blackbox_exporter Enabling instance 192.168.56.11 Enable 192.168.56.11 success Cluster `tidb-v611` deployed successfully, you can start it with command: `tiup cluster start tidb-v611 --init` -- 查看TiDB集群信息 $ tiup cluster list tiup is checking updates for component cluster ... Starting component `cluster`: /home/tidb/.tiup/components/cluster/v1.10.3/tiup-cluster list Name User Version Path PrivateKey ---- ---- ------- ---- ---------- tidb-v611 tidb v6.1.1 /home/tidb/.tiup/storage/cluster/clusters/tidb-v611 /home/tidb/.tiup/storage/cluster/clusters/tidb-v611/ssh/id_rsa -- 启动TiDB集群 $ tiup cluster start tidb-v611 --init tiup is checking updates for component cluster ... Starting component `cluster`: /home/tidb/.tiup/components/cluster/v1.10.3/tiup-cluster start tidb-v611 --init Starting cluster tidb-v611... + [ Serial ] - SSHKeySet: privateKey=/home/tidb/.tiup/storage/cluster/clusters/tidb-v611/ssh/id_rsa, publicKey=/home/tidb/.tiup/storage/cluster/clusters/tidb-v611/ssh/id_rsa.pub + [Parallel] - UserSSH: user=tidb, host=192.168.56.11 + [Parallel] - UserSSH: user=tidb, host=192.168.56.11 + [Parallel] - UserSSH: user=tidb, host=192.168.56.11 + [Parallel] - UserSSH: user=tidb, host=192.168.56.11 + [Parallel] - UserSSH: user=tidb, host=192.168.56.11 + [Parallel] - UserSSH: user=tidb, host=192.168.56.11 + [ Serial ] - StartCluster Starting component pd Starting instance 192.168.56.11:2379 Start instance 192.168.56.11:2379 success Starting component tikv Starting instance 192.168.56.11:20160 Start instance 192.168.56.11:20160 success Starting component tidb Starting instance 192.168.56.11:4000 Start instance 192.168.56.11:4000 success Starting component prometheus Starting instance 192.168.56.11:9090 Start instance 192.168.56.11:9090 success Starting component grafana Starting instance 192.168.56.11:3000 Start instance 192.168.56.11:3000 success Starting component alertmanager Starting instance 192.168.56.11:9093 Start instance 192.168.56.11:9093 success Starting component node_exporter Starting instance 192.168.56.11 Start 192.168.56.11 success Starting component blackbox_exporter Starting instance 192.168.56.11 Start 192.168.56.11 success + [ Serial ] - UpdateTopology: cluster=tidb-v611 Started cluster `tidb-v611` successfully The root password of TiDB database has been changed. The new password is: 097zS8&!1@Vmc+x5Ug. Copy and record it to somewhere safe, it is only displayed once, and will not be stored. The generated password can NOT be get and shown again. -- 查看TiDB集群状态 $ tiup cluster display tidb-v611 tiup is checking updates for component cluster ... Starting component `cluster`: /home/tidb/.tiup/components/cluster/v1.10.3/tiup-cluster display tidb-v611 Cluster type: tidb Cluster name: tidb-v611 Cluster version: v6.1.1 Deploy user: tidb SSH type: builtin Dashboard URL: http://192.168.56.11:2379/dashboard Grafana URL: http://192.168.56.11:3000 ID Role Host Ports OS/Arch Status Data Dir Deploy Dir -- ---- ---- ----- ------- ------ -------- ---------- 192.168.56.11:9093 alertmanager 192.168.56.11 9093/9094 linux/x86_64 Up /u02/tidb-data/alertmanager-9093 /u02/tidb-deploy/alertmanager-9093 192.168.56.11:3000 grafana 192.168.56.11 3000 linux/x86_64 Up - /u02/tidb-deploy/grafana-3000 192.168.56.11:2379 pd 192.168.56.11 2379/2380 linux/x86_64 Up|L|UI /u02/tidb-data/pd-2379 /u02/tidb-deploy/pd-2379 192.168.56.11:9090 prometheus 192.168.56.11 9090/12020 linux/x86_64 Up /u02/tidb-data/prometheus-9090 /u02/tidb-deploy/prometheus-9090 192.168.56.11:4000 tidb 192.168.56.11 4000/10080 linux/x86_64 Up - /u02/tidb-deploy/tidb-4000 192.168.56.11:20160 tikv 192.168.56.11 20160/20180 linux/x86_64 Up /u02/tidb-data/tikv-20160 /u02/tidb-deploy/tikv-20160 Total nodes: 6 -- 附，测试后，可以使用下面命令删除集群： tiup cluster destroy tidb-v611

总结

在openEuler2203和openEuler2003SP3系统都进行了测试,均能正常完成tidbv6.1.1的安装，不过目前官方还未支持建正式环境使用openEuler系统。

注意事项：

1.在openEuler2203系统中，普通用户不再具有systemctl命令的执行权限。

在安装过程中，tidb cluster check、deploy 命令建议不要指定--user 参数为root以外的用户。

如果想指定--user为其他用户，可以提前修改/usr/share/polkit-1/actions/org.freedesktop.systemd1.policy的配置。

# vi /usr/share/polkit-1/actions/org.freedesktop.systemd1.policy --修改action-id为 org.freedesktop.systemd1.manage-units，org.freedesktop.systemd1.manage-unit-files，org.freedesktop.systemd1.set-environment和org.freedesktop.systemd1.reload-daemon的项中 <defaults>部分内容如下： <defaults> <!-- <allow_any>auth_admin</allow_any> <allow_inactive>auth_admin</allow_inactive> <allow_active>auth_admin_keep</allow_active> --> <allow_any>yes</allow_any> <allow_inactive>yes</allow_inactive> <allow_active>yes</allow_active> </defaults>

期待官方早日支持TiDB正式环境可以部署到openEuler2203/2003系统。

附，安装过程报错处理

1. tidb cluster check 命令报错：failed to fetch cpu-arch or kernel-name

$ tiup cluster check /home/tidb/topology.yaml -p tiup is checking updates for component cluster ... Starting component `cluster`: /home/tidb/.tiup/components/cluster/v1.10.3/tiup-cluster check /home/tidb/topology.yaml -p Input SSH password: + Detect CPU Arch Name - Detecting node 192.168.56.12 Arch info ... Error Error: failed to fetch cpu-arch or kernel-name: executor.ssh.execute_failed: Failed to execute command over SSH for tidb@192.168.56.12:22 {ssh_stderr: We trust you have received the usual lecture from the local System Administrator. It usually boils down to these three things: #1) Respect the privacy of others. #2) Think before you type. #3) With great power comes great responsibility. sudo: a terminal is required to read the password; either use the -S option to read from standard input or configure an askpass helper , ssh_stdout: , ssh_command: export LANG=C; PATH=$PATH:/bin:/sbin:/usr/bin:/usr/sbin /usr/bin/sudo -H bash -c "uname -m"}, cause: Process exited with status 1 Verbose debug logs has been written to /home/tidb/.tiup/logs/tiup-cluster-debug-2022-09-11-02-11-58.log.

问题原因：tidb用户没有sudo权限

解决方法：

# visudo -- 添加一行：tidb        ALL=(ALL)       NOPASSWD: ALL ## Same thing without a password # %wheel       ALL=(ALL)       NOPASSWD: ALL tidb        ALL=(ALL)       NOPASSWD: ALL

2. tidb cluster deploy 命令报错：failed to enable/disable pd